|
Leesburg, Ohio | I saw a comment here a while back about the older Raven valves requiring resistors in the circuit when use with Swath Pro, to keep them from reacting too fast and losing communications with the controller.
I have the older valves ('06, I think, with the triangle yellow indicators, instead of the new round ones) and do not have resistors that I know of. It will "lock up" occasionally when it goes thru an area that has several little "slivers" that are not sprayed where the valves are chattering open/closed quickly. Only way to get it working is shut down totally (key off) and power back up.
Has anyone added those resistors to the '06 or older valves, and does it eliminate the "lock-up" problem? Do the resistors come from Raven or Deere? | |
|
another Swath Pro question
