Geo Tracker with some wheels from a wilmar wrangler loader. dump box has 2 hyd cylinders ran off of a 12 volt pump with power up and power down. toggle switch is mounted on the center console by the shifter. Otherwise not much else to say, just some cutting and melting of some steel to make it fit. I did put some stops on the back axle so when about half loaded it is bottomed out. Also locked the transfer case in 4 low. thats more to do with the guys we have the drive it than anything else.
Edited by agboy 6/17/2009 10:07
 (DSCN0627.jpg)
 (DSCN0628.jpg)
Attachments
----------------
 DSCN0627.jpg (78KB - 721 downloads)
DSCN0628.jpg (80KB - 613 downloads)
| 
Homemade Gator?
