|
| regarding your Omni* quickstart option: you can set the quickstart/autoseed function under GPS settings correction source. On one of these pages you can turn autoseed on. But I´m not sure if autoseed is the better choice than setting the convergence limit/distance to a higher level. With 3.00 or higher Omnistar converges within 5 minutes when you do a cold startup. When autoseed failes convergence takes much more time. Not sure about the last statement, but that was how it worked for abaout two years.
Headland function is one of the patterns which Trimble really should rework... | |
|
EZ 500 skips on first pass after headlands
