|
Sunnyvale, CA | In some previous threads it was suggested that if you have an in-line valve in the plumbing, and you select by-pass on the Setup screen, you will have to reverse the wires from your EZ-Boom to your in-line valve to get it to work properly. (this is an example of two negatives make a positive.) When the wires are reversed, then the in-line valve can use the bypass setting. If you don't reverse the wires to the valve, the system will not work if you have an in-line valve and use the setup for a bypass valve. | |
|
? on Trimble EZ boom FM1000 and sprayer
