|
Lakeville, MN | Update
I was able to get a copy of the electrical print for the transmission circuit. I started testing inputs and out puts of the transmission control module. I found the clutch bottom switch open with the clutch released. It should be closed. I had tested this switch prior but the problem was not the switch its self. The print showed another connection in that circuit so I found that and moved it and the circuit was made on and off as I moved it. The pin was never installed all the way into the connector and would not go in the rest of the way, I moved it and its mate to an open slot and all is functioning as normal. | |
|
Versatile 340 with Twin Disc power shift will not move.
