ESW ND | I don't remember the name on our pail, but ours is a factory pumping pail. Metal almost 5 gallon pail, blueish gray metal lid. Rubber hose and metal gooseneck. Been here forever. It works, awkward but works.
School Of Hard Knock - 3/4/2019 19:46
I have an old lever pump with a hose (with a metal gooseneck pipe)that has been in a pail or jug of 80-90 for as long as I can remember. Its really handy except the hose end could have a smaller attachment on it so it would fit through the plug holes where there is only a 3/8 or other small hole.And the hose could be a little longer. I can't quite reach the transmission plug of a semi, but plenty long for a pickup or two ton truck sitting on the cement..It looks a LOT like WALTONS photo above less the pail plate part of it. |
Best way to get 85 -90 and other heavy gear lubes into final drives
