|
Central Illinois | Von, I won't be able to take pics for a couple of days. I made a handle out of a piece of tubing and some flat strap that is attached to my discharge spout. A simple spring return panel mount push button switch is inserted in the end of the tubing. Makes it very easy to position the spout and engage the auger. Also made a simple spring loaded catch to hold the button for continuous operation. We also hooked the talc applicator to the same switch/circuit so it only runs when the auger is running.
And yes it appears that your Augermate is an open center system.
| |
|
Augermate and 12 volt Hyd shut offs.
