|
St Peter MN | My 865E needs fuel after about 11 hours of pulling a ripper. Monitor says it's using 19 to 23 gallons per hour. It has the extra fuel tank giving it about 320 gallons of capacity. (Literature says it holds 330, book says 318) We put in a new sending unit in the tank thinking that was off, didn't seem to change anything. Ran it until gauge said it was out and according to my meter it only took 235 gallons to fill, which would be very consistent with what the monitor says it's using. I feel like we are going to have to just run it until it truly runs out to know what is going on. Just curious what other people were seeing.
| |
|