|
Swaledale, IA | While you could there are so many weigh wagons around anymore. Most seedtenders are a weighwagon that I would not doit if accuracy is desired. The AgLeader says to recalibrate when switching hybrids also so while I do not do that I always use the test plot to calibrate the unit. The other thing is you can combine a test plot faster that way, dump and go combine and by the time you are back the results are recorded and you can dump again.
Edited by hydro70guy 11/12/2018 07:06
| |
|
Weighing corn plot with yield monitor?
