|
Watford City, ND | What's your setting in 'D' for the implement dimensions? Sounds like if your guess row is too narrow (and its trying to adjust for it) try decreasing that number. Also, try increasing the turn radius of the tractor - may go from 22 up to 26 or so. Honestly I don't EXACTLY know what this setting does but I would try it...another thing to try (try only one change at a time) is in the iTEC Pro Settings button "CHANGE" adjust the implement turn radius (make it higher). GOOD LUCK - and don't wreck anything :)
Also, what's your offset for your headlands? With a 61' tool I'd go AT LEAST 120 if not 180'. Sounds like a lot (and it is) but even on a mile long field that's only 21 acres of headland for each side, very acceptable in my opinion. | |
|
Help with iTech Pro dimensions
