SE MT | teach84 - 10/7/2018 18:02
HIGHLY recommend that the wall to the right be overlaid with T-111 Hardi-board. Looks like asbestos board, but has some fire resistance , will tolerate heat. cannot stress this recommendation strongly enough
Thought about it, but the furnace recommends anything over 4 feet away does not need to be fireproofed. There's a 2.5 foot gap between the back and the tin wall, so I removed the insulation there. Thinking this winter I will re-insulate and put up cement board for protection.
If the heat is bad enough to catch the wall on the right on fire, I've already lost the shop anyway. |
Waste oil furnace anyone?
