|
Tuscola, IL | I posted these a couple years ago as I was trying to build a skid to mount all of the tools (box, air compressor generator) into the truck and able to be removed easily and quickly. I needed to put the box on a ‘drawer’ because it was too high in the air when you set it on the skid. I ended up scrapping the idea because the wood wasn’t strong enough with all the weight on it. The slides however were plenty strong enough for a loaded road box. I’ll use them again when I go back to build this project from steel. These are just snap on master series drawer slides
Edited by CASE3594 9/10/2018 20:28
 (62DA89D3-D715-4C3A-8B24-14817C1D9442 (full).jpeg)
 (6222053E-B361-4612-B2F2-FBA87DA83050 (full).jpeg)
Attachments
----------------
 62DA89D3-D715-4C3A-8B24-14817C1D9442 (full).jpeg (146KB - 29 downloads)
6222053E-B361-4612-B2F2-FBA87DA83050 (full).jpeg (174KB - 15 downloads)
| |
|
Any pictures of HD homemade sliding drawers or trays ?
