|
White Stone, Virginia | By far the best disconnect I have used. it is made for a boat so it is waterproof to jets of water (pressure washer) and can be mounted just about anywhere. 300 to 600 amps. I used the E series single circuit on a R688ST Mack with great results. I mounted a piece of vertical plate to the drivers side frame rail and screwed the switch to that. Rated 350 continuous amps, 1200 amps cranking (30 sec), 600 Intermittent (5 min.). Lifetime warranty. $38, but it won't melt down on you! It is a really nicely put together product you won't be disappointed in. I wired the positive battery cables through it. You can get the double circuit if you ever want to be able to isolate one set of batteries.
https://www.bluesea.com/products/category/11/Manual_Battery_Switches
https://www.defender.com/product3.jsp?id=183542
$75 for 600, 1750 and 900 amps:
https://www.defender.com/product3.jsp?id=341919
Edited by Rawleigh 8/13/2018 16:17
| |
|
Best battery cut off switch for semi?
