|
Aberdeen MS | I'm using a 800 vertical fold for my strip till bar.
I am still able to fold up the wings and have the the " 6 inch lift" disabled. The bar has 3 ports in the middle....2 are close together and the 3rd is a solo port. The solo port is the one tapped into the lift assist circuit. Cap off that solo line to eliminate what you are experiencing.
What I did with mine was eliminate the "brain" for the marker set up and hardwired the solenoids direct to the cab switch box. I just manually switch markers round to round or can leave both up.... or have both down with just flips of the switches.
So far it hasn't been a problem, but I only capped off the port/fitting coming from the lift assist side. The port in the bar I left open for the cylinder to "breath". It is a separate chamber of sorts in the cylinder itself from what I was told. | |
|