|
NE Mo | The manual may tell you how to check, but if the meter is connected to the console, remove the liquid lines from it and blow in the meter. The console should register. If you shake the flow meter, it should rattle. Try mounting the meter so the liquid flows in the opposite direction as it has been. The flow meter should be mounted virtically, with the liquid entering from the bottom. The magnet in the turbine, can collect rust/dirt. Also the magnet can get weak over time. I tried a new turbine in mine, but the bearings also should have been replaced, so the new turbine did not fix the problem. New turbine was $25, so it was worth a try.
Hope this may help | |
|
raven flowmeter
