|
mercer county, il | nope, when the tag says TS zero, that means you have top stop injectors.
Anymore, most accessory drive pulleys I come across have been moved or moved on their own. usually I use 3/4 wrench on one of the locknuts for the adjusters on a rocker on an injector to find max lift, and check the position of the accessory drive pulley (or a dial indicator if I am feeling fancy).
I cannot remember the order off the top of my head, but when the injector rocker is at its max downward travel, you torque the adjuster on the rocker arm to 6 in lb. If you set a top stop injector to 125 in lb, you stand a very good chance of sticking an injector, especially if the injectors have very much use (the more carboned up they are the more likely to stick. | |
|
8970 855 cummins overhead set
