|
McCanna, ND | a guy on here sells a one piece cone liner made out of AR235 (same steel as rotor) for around a thousand bucks I think. I put 400 separator hours on mine last year and the only wear it had was where the welded the seams together since it didn't have quite the same curve as the rest of the liner and acted as a small ramp. You have to look to see the wear its so minuscule. When the rotor is out I would put new rasp bars on and get the rotor balanced. If nothing else at least balance it as it only costs a couple hundred bucks usually. | |
|
Case IH 8120 combine problems
