garvo - 6/8/2018 06:40 we run at 12o clock on the gauge Jim for about 500 bales when new -then 2o clock position after that-at about 8000 bales bearings get replaced in rollers -when we use to run really high pressure the bearings only made it to 4,000 bales That is one of my concerns. Thank you. 2-2:30 o'clock is about where I'm running it now, close to the top of the green range.
Edited by Jim 6/8/2018 08:22
| 
Baler pressure/density settings
