AgTalk Home
AgTalk Home
Search Forums | Classifieds (56) | Skins | Language
You are logged in as a guest. ( logon | register )

40 series Deere hydraulics
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
ccjersey
Posted 5/22/2018 07:09 (#6772936 - in reply to #6772621)
Subject: RE: 40 series Deere hydraulics


Faunsdale, AL
Where are you returning the oil from the motor? Should be into the SCV coupler or the side of the SCV through a dedicated return coupler. This is the return not the motor case drain. if it has one of those 3rd hoses it should dump directly into the rear end somehow.

Have you changed your filters lately? Additionally the transmission sump strainer may be clogged.

Finally it may help to turn down the flow rate on the SCV..... EVEN THOUGH you are using a separate valve in the line to adjust the flow rate. Not sure why that may help but it does on mine. I turn the flow up only enough to get the flowrate I need and then everything else works faster.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)