Posted 4/12/2018 18:13 (#6704844 - in reply to #6704605) Subject: RE: Adding height to pole barn
Southern Iowa
Sheep Herder - 4/12/2018 14:34
I've seen several cases where the pole barn was lifted out of the ground and new short poles or square poles were bolted to the side of the existing poles. Then just add tin to the new part. Seems to work and look OK if done right.
That's what I was thinking.... lift it up, splice in poles, and add tin to bottom. Make it look like the wainscoting you see on new buildings with a second color.
Otherwise, if it's a good building, I'd consider moving it. House mover can do it easily. drill holes and pour full of concrete to set it on or use perma-columns.
Adding height to pole barn
