AgTalk Home
AgTalk Home
Search Forums | Classifieds (95) | Skins | Language
You are logged in as a guest. ( logon | register )

Adding height to pole barn
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
801486
Posted 4/12/2018 14:16 (#6704593 - in reply to #6704336)
Subject: RE: Adding height to pole barn


west central Iowa
jtpfarm - 4/12/2018 10:40

Are you dismantling it or moving it?

I have about $7500 into purchasing and moving a 60x40x14. 2 year old steel and 2 roll up doors that have been opened twice. Couldn't even come close to buying just materials for that.

If you are moving it there is 2 options. You can put longer poles in and bolt them to the existing poles. Or cut the existing poles off flush with the bottom of the building and nail 2 planks to the bottom all the way around. Then put poles in the ground at the height you want and nail planks to the top. Then set the building on there.

If you are taking it down, cut the nail heads off. They make a tool for it. Then screw the steel back on using the screws with oversized washers. The sidewall steel can be reused by filling the gap with a different color to create a wainscot.


Have you got a link or source for the tool to cut off nails?
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)