|
Southern MN | I'm in the same boat is the original poster. Have a White 6722. I've looked into these JD clutches in the past. Last time I determined the clutch was too wide to fit between the factory transmission and the row units. See pic (not of my planter, but similar showing not much room).
If needed, a 3/4" to 7/8" hex bushing can be had from Tru Count for about $10. Part # 68364-90-01 Hardware Kit White
Jeff, if the original poster isn't interested and we can make these work on my planter, I'm only 30 minutes from Waseca and would meet you there. I would need to know how wide the clutches are, and I would need to remeasure my planter to see how much room is really there.
 (plantertransmission.jpg)
Attachments
----------------
 plantertransmission.jpg (23KB - 73 downloads)
| |
|
Half width shutoff clutches
