|
| Easy and quickest way.
1. Take two rail;road ties about 3 feet long . Lay them side by side on concrete floor.
2. Align tire and wheel holes ,brush vegtable oil, soap water solution on wheel rims and tire and place on top of the railroad ties .
3. Take another railroad tie block and place it on top of the aligned wheel rims and tire.
4. Get a strong pallet with about 1200 lbs or more of front tractor weights on it and lower it down on the railroad tie top block which presses the tire on the rim laying on the railroad tie table with ease.
5. You do not need to mess with long alignment bolts with this method . The pallet of weights presses the halves together well enough that the original planter wheel bolts will be all you need
Planter tire foot stomping is for apprentice rookie college boys
Edited by tex 3/28/2018 09:59
| |
|
What’s the easiest/best way to press a Deere gauge wheel back together?
