|
Southern Alberta Canada | LOL, I'm so happy to successfully drill holes it never occurs to me they might be slightly undersized, I usually just blame it on burres or a worn bit, ream the hole with the bit and carry on. I almost always go a 64th or 32nd over these days as well unless it's a critical fit project. If you think about it almost all holes in factory made stuff are very loose, anything that requires precision is aligned with dowels.
One thing that really bugs me though is flatwashers, many are oversized almost to the next size up, what's with that?
Edited by Offroadnt 3/2/2018 07:40
| |
|
Drill bit to hole size question....
