|
| I'm not sure how you've got everything else wired, but the light plug has a constant and a switched power pin, that's where the air drills plug in to power the clutches. If your implement has lights on it, you should be able to add wires into the plug that's already there, or most any parts store should be able to get you a plug. Also, if you're not using it for anything else, the ISO connecter has good constant power on the biggest pins in the top diamond, and switched power on the slightly smaller pins. Your dealer can get you the Deutsch connector to make a harness for it.
If you need lots of power, though, those big grey slide-connecters are the ticket - I've used them for many years powering winches and such on trailers, starters on engine-drive welders, etc. | |
|