|
Floyd County, Iowa | I have an inductor with a venturi, on the down stream side of the pump.
If the tee in your pic is for the hopper, I think you want it in the straight section, where you have the gap.
The section you have the tee in should be the bypass.
Mine has a cast venturi, and I need to change it to pvc, as the cast is always rusting and flaking off on the inside. I see them (pvc venturis) online for $67.
edit: I meant POLY, not PVC
Edited by oldbones 2/4/2018 08:53
| |
|
Homemade Venturi - 2” PVC? (pic)
