|
East Central wisconsin | Nothing picture worthy yet. I used what I had laying around, had some 3/4" and 1" black plastic pipe that I sliced up. I think the 3/4" should work nicely on the mostly 1/2" hydraulic hoses that run from the control valve to spade drives. I have some of the hoses that get close to the blades as they go up and down. I did wrap a 3/8" line running to back gate lock, seemed a little loose on it, but will be ok. I'm hoping that the 1" plastic pipe will wrap the larger 3/4" hydraulic lines? It should. Thanks again.
| |
|
Followup #2 Poly pipe spiral cutter now drill driven (pics) & video links
