|
| A bale spear that will slide onto a flatbed truck and hook to the gooseneck ball, will have an electric hydraulic pump to power the cylinder. The commercial built versions only tip the bale about 45° which doesn't provide much ground clearance and it leaves the weight of the bale way behind the rear axle. This one has almost 90° of tilt so most of the bale will sit up over the truck bed.
 (20180110_164821.jpg)
 (20180110_164906.jpg)
Attachments
----------------
 20180110_164821.jpg (143KB - 45 downloads)
20180110_164906.jpg (149KB - 45 downloads)
| |
|
With all the welding project pictures lately
