Jon Hagen - 1/10/2018 16:46
GT500KR53 - 1/10/2018 14:35
Hook the positive clamp on the starter stud where the positive cable coming from the battery is bolted on then put the negative clamp on the negative battery terminal or a bolt head or something on the step/ frame and set charger on 12 volts
All correct except on a 4650 series JD DO NOT connect the negative jumper clamp to the left battery negative battery post, doing so would put a 12V boost across the left 6V battery and may cause a battery explosion. Ground the 12V jumper to engine or tractor chassis.
How to jump jd4650 with 2 6 volt batteries?
