|
scmn | Have done a 2520, 3020, and 4020 where we removed the 5/8" tube pressure line that runs from the priority valve to the transmission near the diff lock valve ( line runs under the cowl and floor) Took the line to a hydraulic shop and had them cut line and flare ends; a chunk was removed to place a -10 JIC tee in the line and connected loader to this pressure line. Since line is under floor you can route to right or left side of tractor. Cost about $35 with the tee at hydraulic shop, hoses were extra; way cheaper than the power-beyond block. | |
|
Hydraulic options for 725 loader on 4020
