red river valley se of fargo | Yeah I made a simple clutch on the jackshaft that I needed to build anyway to account for the offset in the drives. It's just a simple spring pin on a housing with brass bushings and a grease zerk. One sprocket is welded to that and the other sprocket with holes to receive the spring pin machined in it is keyed to the shaft. Seems to work pretty well.
If the spring pin wears out I will have to cut it all apart to replace which isn't ideal but that's how it worked out.
Edited by kritzy 12/15/2017 21:55
|
I did some fabricobbling in the shop. (Lots of pics)
