Middlesex County, Ontario | The front weight bracket is a block mounted to a 3pt hitch.
Fendt historically offered three configurations of front hitch and I assume this carried over to Challenger.
Option 1: full front three point hitch with its own control knob and float and depth control, etc.
Option 2: front 3 pitch hitch is just on a hydraulic lever and goes up/down/float, you can use your timers if you want.
Option 3: rigid arms that do not move relative to the tractors frame. You can move the arms up and down a little bit by dropping the front suspension, which is how you would hookup the weight blocks.
The mounts on the weight blocks look like they are set to carry it as low as possible and is adjustable to carry it a bit higher than shown. |
Challenger 1046 demo impressions.
