|
SW MN | If buying used I would pay to have a Good Tech check it over. there's areas that need to be checked. I bought a used 580r its been a good machine, they all need repairs. There are now a couple of non-oem places to get concaves, cylinders, and rear impeller's. that are much cheaper than class. Sometimes its the luck of the draw just like any thing else you buy. Also there's a learning curve, but its a machine that can be adjusted for all crop conditions. My personal belief is the 580 is over powered, 500hp through that machine is too much. You HAVE to react fast when the monitor buzzes telling you a shaft speed is low. I came from a NH TR 98 so there was a lot to learn. | |
|
Anyone regret buying a lexion combine?
