|
Trivoli, Illinois | Another thing to check is to make sure that you are getting the full travel out of your hydrostat lever. I adjusted mine last year. On the end of the cable that goes from your hydrostat lever to the hydrostat intself is a fork that you can rotate to increase travel or decrease travel. I rotated mine to far at first because when i put the hydro level in the neutral position it wanted to creep forward while on a flat surface. So i adjusted it back a turn at a time until it would sit still while in the neutral position. After doing this i was able to pick up about 2 mph on my top speed. | |
|
2388 combine problem
