|
| If you have an extra Pollack implement plug in (female) take two 10 or 12 ga. wires about 4-5' long, one wire goes into the top (white) terminal and the other in the center (blue) terminal. Then take a two prong weather pack (male) and attach the two wires to this, if I remember it doesn't matter which way it's wired. Unhook the frame plugin on the hydralic solenoid block (gold color block above the hitch area). If the tag happens to be gone off the wire it's the solenoid at the back bottom. Plug in your jumper and you should be good to go. | |
|
stackfold case 1200
