|
Garden City Kansas | deere has a kit for both upper and lower scv.
if scv is slow or leaking down then upper scv seals need to be redone, valves may or may not need to be replaced. if they do you need a tool to grind on the valve seats to make them smooth again so seal doesnt leak there. after you have all that taken apart you need a dial indicator and a vise to adjust opening and closing pressures. specs are found in a tech manual.
if its the lower scv leaking its simpler. dont loose the balls in coupler, and use grease to hold them in place when getting everything back together. | |
|
Rebuilding Deere 40-series SCV's - how difficult?
