|
Redickville, Ont | Ok I've bent over backwards enough times for agco I have no problem sharing although this was melroe design. So it's 1988 Chrysler Labarin calliper. Neighbour made bracket up and welded it to the final drive. He lived beside wrecker so he kept going down and trying callipers till he found one that fit. It's hung upside down now to make enough room to get it mounted. Only problem is there's no e brake so if you figure that out let me know. First two pictures are original system. I have a 3430 I'm making for spare so have old style brakes still till I convert them. The picture after are conversion. Let me know if you have any questions.
Just to add it was nat approved painted lol but flaked off since conversion 2006.
Edited by CMA 6/4/2017 20:41
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
 (image.jpeg)
Attachments
----------------
 image.jpeg (105KB - 181 downloads)
image.jpeg (117KB - 149 downloads)
image.jpeg (131KB - 173 downloads)
image.jpeg (156KB - 163 downloads)
image.jpeg (182KB - 166 downloads)
image.jpeg (141KB - 124 downloads)
image.jpeg (140KB - 146 downloads)
image.jpeg (128KB - 131 downloads)
| |
|
Best brake caliper for converting Spra-Coupe 3430 to automotive type?
