NW KS/ SC ID | wht one - 6/2/2017 11:09
Bill, I didn't know that, how do I adjust the flow rate on the White?
Bill is my dad, and That is an excellent question that hopefully Robert Greif or Kooiker know the answer too. :)
On the allis there is a little half turn valve with an indicator that comes through the cab floor on the 2wds and you can adjust it in the cab.
The White, all we have done is lower the system pressure with the screw under the cab so the pump doesnt have to work so hard.
After reading here on NAT, we became aware of a pressure relief valve, and I hope we were not adjusting it, as that would cause system overheat since its always in bypass.
Since all we seem to do with the White's is tillage (its what that big ol long frame does best! :) ) we like lowering the PSI so it will still lift the blade plow, but not much more. |
Open Center/Closed center hydraulics questions
