NC IA | cact34r - 5/25/2017 16:57
Ok I was just wondering - I won't run with the lever in between high and low.
regarding the transmission brake - I thought that was the brake that stopped the gears from spinning when you pushed the clutch in so that you could shift sooner than waiting for them to spin down. I thought the 6xxx series had that but not the 3xxx series. if there is another type of transmission brake I don't know what it is.
I understand what you are saying about the other. I'll check now that I'm home from my other job.
ALL large frame, gear drive (non-hydro) tractors 706 through 1586, and the 33-35-3788 2+2s had mechanical linkage transmission brake. (Bottom cover of speed transmission/TA housing.) 30-32-3688 and 63-65-6788s had same transmission brake, only hydraulic actuated. Your steering pump is mounted to this bottom cover that I speak of, and I believe that is a 2+2 only thing (the separate steering pump.)
If you said the hyd oil was on the "add" mark, that is 5 gal low. So to get it 5 gal over-full, you need to be adding 10 gal from when it originally was on "add." |
IH 3588 hydraulic warning light, TA issues help (details)
