just a tish NE of central ND | I used to have cold flow canisters..when you cut them open you realize all they did was drop the liquid to the bottom and it ran into the knife hose as a liquid.the vapor that boiled off rose to the top and fed another hose into to opener knives as well.so what is the difference if both liquid and vapor are fed down the same frozen hose into the same place? Once the nh3 pressure is dropped down it is going to boil and frost stuff over at boiling temperature. Its doubt-fully going to cool itself enough to make a difference in what goes off lost as a vapor when the hoses are already frozen to boiling point temps just like inside the cooler affair.
Edited by School Of Hard Knock 5/12/2017 13:00
|
Can raven nh3 flowmeter and valves be added to a nitrolator manifold?s
