|
Rivers, MB | Thanks for those that made constructive comments. Many of them were very helpful.
We had the CaseIH service tech out. He seems to have solved the problem by changing one of the hydraulic tips on the lift circuit for the drill to a round ball type Pioneer tip from the pin/nipple style.
Will know better after a day of seeding whether it truly solved the problem.
He says a lot of hyd problems stem from the pin type hyd tip. Seems simplistic but we will see.
I questioned him a bit about hooking up hose the "correct way". Except for systems that require the float option like the air seeder fan (which we had hooked up so we could coast to a stop in float), our tractor will work fine with the hoses in either combination. There is a slight increase in flow (possibility up to 3gpm) when hooked up "correctly" but for most applications, losing 3 gpm out of 32-33gpm (max flow thru one remote) is not an issue. | |
|
tractor hyd - is there a correct way to hook up hoses on a remote/SCV??
