|
Central ohio | In my opinion their engineering and build quality is poor. The first two Polaris we owned had good engines but poorly designed electrical wiring and poor CV axle boot design. The 800 would tear intake boots every 2000 miles which is every nine months. All of the wiring going to the handle bars had to be extended as it was to short from the factory and pulled itself apart.The switches didn't have water tight connections so they ended up corroding and needing replaced. Our 2014 Ranger had the oil pressure relief valve stick shut at somewhere between 0-20 hours scoring the cylinders. We now have a Yamaha Viking. | |
|
What are the good and bad of Polaris Rangers?
