|
Northern Indiana | If you want to increase the capacity of the machine look for a triple upper sieve. Makes a big differance in high yielding corn.
One othor thing check to see if you have a grease zerk on the splines on the clean grain auger. (door by the gearbox on that drives the auger) and be sure to keep these splines well. Every few days.
As far as electrical problems, there is a update to put some of the work lights on a second relay to tsplit some of the load on the worklight relay in the cab by seat. Another thing that will save you some grief if you have trouble with the lights is to make sure that all the circuit breakers by the starter are clean and tight. Corrosion will cause them to open when on.
Grain loss monitor, you arent missing much there. You can make it read what ever you want. I use it to judge when we need to slow down going up hills, but I dont put too much faith in it.
Personally I like the old thing, but I dont really know any different machine. | |
|
1st Time TR86 Owner - Any Advice
