|
Wi | X2 keep the belts tight and warm them up before working it. Doing this will keep the issues away. We had some guys that wouldn't do this and would smoke the belts every time, sometimes accompanied by a nice little fire. Usually ran 200-300hp on our 1100.
Make sure to check the tractor from time to time, or add an external light for any idiot alarms if it's an older one.
If we still did a lot of grinding I would rig up a remote control for the tub tilt. The quicker you can tilt that when things go wrong, the fewer issues you will have.
We had a rotogrind for 15 minutes, apparently they are not built very heavy.
Edited by durallymax 2/18/2017 08:24
| |
|