Posted 2/4/2017 08:49 (#5815737 - in reply to #5815456) Subject: RE: JD 4840 Turbo Oil Return
south texas
I know u can take it out if turbo is off.
the flex line is a good idea. Never tried it. Weld a fitting to old drain pipe so u can use flange at turbo. The block is pipe i believe. If u could get the drian tube in there with enough steel to get past exhaust manifold, rubber hose would be fine to block. U can test this by cutting old pipe just below exhaust and see if u can remove it.
JD 4840 Turbo Oil Return
