|
Floyd County, Iowa | For some reason, years ago, I had to take that tube off of my 4450. At the time, I wondered why you couldn't put a flexible line in there.
Maybe a possibility to just cut the tube out and replace it with braided flex tube?
Might not be possible with the 2 bolt mounting flange on the top where it bolts to the turbo, IDK, but someone on here must have done that, and they'll chime in.
In my case, IIRC, I took the turbo off for replacement.
edit: Just remembered. I had to take it off to get the block heater out. Wouldn't budge with a crow's foot, and hot enough room to get a socket on it.
Edited by oldbones 2/4/2017 12:25
| |
|
JD 4840 Turbo Oil Return
