central ohio..between Springville and Millbrook. | a 4455 would run a 3x3 baler I think, but you will be on high alert all day while running it.
I ran a 3x3 CASEIH baler with a 2-135 WHITE for years. it had big duals, lots of weights, and a chain holding the drawbar up. (189 horse) . Running the baler was no problem but I always had to be looking 3 steps ahead and leave myself an out on hillsides. those balers are HEAVY. you don't wanna go down any steep hills where you are forced to turn sharp at the bottom. my next baler was tandem axle and that helped with the drawbar weight, but not the stopping.
the WHITE got replaced with a bigger tractor as soon as the banker said I could:) I agree with the others in buying an 8100. I ran an 8100 on a small baler a few times and although it looks a Lil awkward, it handled it great.
Edited by HeyhayJCM 1/28/2017 05:43
|
JD 4455 or 7810
