AgTalk Home
AgTalk Home
Search Forums | Classifieds (80) | Skins | Language
You are logged in as a guest. ( logon | register )

john deere powershift
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
pirlbeck
Posted 1/10/2017 07:35 (#5757481 - in reply to #5757431)
Subject: RE: john deere powershift


West Central Iowa
farmerpope - 1/10/2017 07:06

clutches or what


Lots of issues in a lot of different places, clutches wouldn't be so bad, but this one needs lots of expensive hard parts. See the burnt spot in the B2 section of the planetary pack? That is what happens when the B2 ring gear breaks into 2 or 3 pieces. This thing had problems with the C1 & C2 clutch, the input planetary, the rear planetary pack, the PTO clutch, the PTO brake, the MFWD clutch, the reduction gear train, brakes are shot, and a bearing out of the trans pump, ruining it. My first estimate using all new OEM parts put the total repair bill at well over $30,000. We are doing it with some rebuilt parts, some very good used parts, some new OEN parts and some new aftermarket parts. Still going to be way too expensive, but the owner insisted on fixing it. It is getting every bearing and race replaced also.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)