|
| On our old 7200, we always took the two clamps off, then raised and held, but when you left it back down the center was always high. We always then bled oil out of the center cylinders to level the center with the wings. Don't know if that was proper, but that's the way we always did it, and ran it that way for 15 years. It always maintained level for the season. Never worried about frame height other than to make sure it was level across.
Edited by thefarmers 1/2/2017 20:26
| |
|
Master cylinder 7000,7200 correct procedure I rephasing
