Posted 1/2/2017 18:30 (#5739427 - in reply to #5739403) Subject: RE: Master cylinder 7000,7200 correct procedure I rephasing
Little Duck - 1/2/2017 18:23
Take the stops of that are held on with hose clamps. Raise up and hold hydraulic lever for a count of 30-40. Then down for a count of 30-40. Do it couple of times then put stops back on and should be good to go. Holding hydraulic lever gets everything rephrased
Good luck
What about bleeding cylinders for air from bleeders
Will ground height be correct
Master cylinder 7000,7200 correct procedure I rephasing
